by Star Rapid | Jun 29, 2018 | Blog, Uncategorized
新的增材制造技术层出不穷，其中某些技术适合消费应用设计，而某些技术则适合工业制造，并不是所有的技术的都适合制造手板模型。让我们一起来了解一下利用3D打印技术制造手板模型的七种技术，探讨每种技术的优缺点，看看哪种制造技术最适合您的项目。 立体光固化成型技术（简称SLA）... 
by Star Rapid | Jun 15, 2018 | Blog
所有金属材料的手板件或CNC车铣件在加工以后都会在产品表面留下加工痕迹，这些加工痕迹的深浅是由切割刀具的锋利程度及材料本身决定的。一般来说这些加工痕迹可以忽略不计，但是按照严格意义上的“成品”来说，还需要额外的一到两个步骤才能完成。今天我们来谈一谈制作完美金属产品的七种后处理方法。 打磨 打磨是利用细小的研磨砂粒对产品表面进行摩擦从而产生一种散漫的，非线性的纹理感效果。将不同的研磨砂粒粘附在衬纸或者板材背面，研磨砂粒根据尺寸不同可以用不同的“粒度”区分：粒度越高，研磨砂粒越精细，因此得到的表面效果也越好。... 
by Angela Black | May 4, 2016 | Design Talk
There are several ways to form a finished plastic item, so we’d like to tell you about the major techniques and their pros and cons so that you can make an informed decision about which is right for your next project. 1. Plastic Injection Molding By far the most... 
by Angela Black | Jan 19, 2016 | Tech News
A truly revolutionary new class of material successfully combines the best attributes of thermoforming and thermosetting plastic. This could change the way we make rubber ducks, jumbo planes and everything in between. It might also greatly effect and improve our... 
by Angela Black | Aug 10, 2015 | Star News
For the third year in a row, Star Prototype played host to a group of young entrepreneurs and visionaries who were part of the “accelerator” program of HAX of Shenzhen, China. (www.hax.co) This year was the best yet, demonstrating STAR’s commitment... 